Additional Features:
Made of Steel
For use with cast iron bushed bore pulley
This U1 Bushing with 5-1/2″ bore is a high-quality precision product that is built for strength and strength. U1 bushings are being used in an extensively wide variety of applications, which includes; sprockets, shaves, pulleys, gears, and much more, we likewise offer all of these items. What models this bushing apart may be the high-quality steel building along with precise manufacturing and top quality control; this ensures that you always get a premium quality constant product. What really pieces us apart from the other folks is our experienced expert workers and our company-wide objective of customer satisfaction.
1. Be certain the tapered cone areas of the bushing and the inside of the driven item happen to be clean and free from anti-seize lubricants.
2. Place the bushing in sprocket or various other part type that accepts the bushing.
3. Place cap screws loosely in pull-up holes. The bushing remains loose to make sure sliding in shape on shaft.
4. With important on shaft, slide the sprocket or other portion type to the desired posture on the shaft. Be sure to keep the heads of the cap screws attainable.
5. Align the sprocket or component type, tighten the screws on the other hand and progressively until they will be pulled up tight. Usually do not work with extensions on the wrench handles and do not permit the sprocket or portion to be drawn i contact with flange of bushing. At this point there must be a gap between your bushing flange and sprocket, make sure this gap does not close.
Double split barrel ensures concentricity
Grips the shaft with confident clamp fit
High torque carrying capacity
Permits blind assembly
Load not carried or limited by mounting screws
External key of all sizes for positive drive and increased torque carrying capabilities
Double-split barrel for confident clamping
Solid flange to maintain concentric bores
Available in in ., metric, and spline bores. Bore range from 3/8″ to 10″
Solid Flange & Twice Split Barrel – Assures better concentricity to the shaft.
Key to Key Travel – With keys in both shaft and merchandise to supply the strongest possible drive.
3/4″ per Foot Taper on Barrel – Personal locking taper provides the highest amount of mechanical locking item to product.
Taper bushing are trusted together with sprockets, v-belt pulleys, timing pulleys, coupling and other mechanical parts with taper bore connections.
Taper bushing series are constructed of high quality engineered elements with wonderful tolerance. The feature is easy to employ and needs no added alteration. These bushings can suit almost all types of assemblies and sizes. They will be the best choice in style for mechanical connections.
To complete designations add bore size. For example: PD1215X16MM designates a 1215 taper bushing with a 16mm bore.
No costly re-boring: complete range of both metric and imperial obtainable.
Standard range suits up to 125mm/5″ shafts & Hub diameter required is determined by the application.
Complete short reach range readily available, for compact compact assemblies & Clean, Compact Style.
Ease of installation and removal.
This Split Taper Bushing was created exclusively for use with cast 
iron bushed bore pulleys and may be purchased on the same page as the pulley you will need.
For use with 1 3/16” shaft sizes.
Includes 2 set screws.