We are focused on research and development of items that meet the increasingly superior electronics industry and so are widely used in computers, kitchen appliances, consumer electronics, communications, information, industry, medical and other fields.
We also has Pto Adapter china patent for 360 degree AC PIN interchangeable type adaptor in fact it is leading the world’s unique design.
Ever-Power provides items which are smaller sized, lighter, more electrical power efficient, and easier to use.
We selling products all over the world and acquire the certifications for every single of country. And in addition acquired ISO9001:2015 and ISO 14001:2015 etc. to make sure products meet up with the latest regulations.
Gear adapters attach between the vehicle transmitting and power take-off, and may serve several purposes. Most commonly, adapters are used to change the way of rotation of the PTO end result shaft. They can even be applied to space the PTO out and from the transmission circumstance. On some imported or non-SAE normal transmissions they allow for the mounting of regular 6-bolt electric power take-offs. Gear Adapters can be found to match most popular transmissions.
Several body configurations: Can relocate the PTO output shaft to improve clearance for a driveshaft or direct-coupled pump
Changes PTO shaft rotation: Complements PTO rotation compared to that of the driven equipment
Standard and nonstandard bolt patterns: Complements SAE standard PTOs to non-standard transmissions
• Frame made of 1/4″, 3′ x 3″ and 1/4″, 2″ x 2″ metal tubing
• Operates off of skid steer hydraulics
• Requires a the least 16 GPM; maximum of 22 GPM (creates 20 to 40 HP off of the power take off)
• No need to modify ability take off shafts
• Adjustable lower arms
• Reinforced heavy duty universal mounting brackets
• Complete with motor, hydraulic hoses and flat faced couplers
• Ideal for three point electric power take off apparatus – snow blowers, mowers, tillers, post hole augers, etc
: Over-running clutches give a safe means to protect operators and pricey machinery from conditions when the inertia of PTO influenced implement exceeds and over-runs the tractor PTO rate. When this happens, the over-operating coupler will free-wheel
smoothly and safely. Over-running clutches will normally tolerate applications needing up to 65 h.p. at 540 rpm and 100 h.p. at
1000 rpm. Excessive shock loads or drive line angularity will reduce this capability
If the space of your PTO will not fit properly within a tractor, a PTO adapter can extend the size without having to replace it for a new one. This adapter comes with an overall length of 7-3/16″ with a male end 1-3/8″ x 6 spline and a lady 1-3/8″ x 6 spline end.
Create additional size on the finish of your PTO. This tractor PTO shaft adapter has both a female 6 spline end and a male 6 spline end, each end has a diameter of 1-3/8 in. This enables more connection alternatives and is suitable for anyone that owns a mature tractor because the older parts might not exactly be produced anymore and are less common.
The over-running coupler is an essential part of PTO drive on rotary mowers, bailers, hay conditioners or any implement where inertia of driven unit could be required to over-run generating source. The coupler drives solidly from tractor to put into action and free wheels efficiently when implement exceeds tractor PTO speeds. All dimensions are nominal.
Converts a 1 1/8″ keyed spline to a 1 3/8″ 6 spline.
Necessary with 1000 RPM gearcase upgrade or Three Point Hitch kit for the 25PTOC.
This Small 1000 (21 Spline) to 540 PTO Adapter is the perfect match for your Shop Dog. It really is conveniently carried 
in the Store Dog’s hitchpin and PTO adapter carriers.
This is also a good PTO adapter for tractor use. This adapter reduces the tractor’s PTO from 1-3/8″ x 21 spline to 1-3/8 6 spline (540) and extends the PTO shaft 4-1/8″. It has an overall amount of 6-3/8″ and is rated for tractors up to 70 HP.