Single and dual reduction planetary equipment drives to be utilized with electric, hydraulic, air flow motors or mechanical power insight from high swiftness, low torque sources to provide decreased speeds at increased torques. The input side has standard SAE pads for electric motor mounting. Obtainable in the three result configurations shown below. Many units can be furnished with an intrinsic parking brake.
One reduction drives are limited to 3500 RPM input; dual reduction drives to 5000 RPM. Units with essential parking input speed is bound to 2500 RPM.The same torque is available in either direction of rotation. Torque rankings are intermittent. For constant operation reduce torque rankings to about 1/3 to 1/2 the values shown. Products provide 95% power transmission hydraulic planetary drive efficiency.
Wheel Drive
Input side has regular SAE pads and splined insight. Output side has hub for mounting automobile wheel. Free wheel can be done by using the springtime disconnect to disengage the drive shaft. The disengage feature is usually regular on all wheel drives.
Shaft Output
Input side regular SAE pads with splined input. Output side choices include: Keyed round, hexed, hollow, tapered or splined shaft.
Spindle Drive
Input side is regular SAE pads with splined insight. Output side has a flanged spindle for coupling to the strain.
Swing Drives
Ever-Power model 6 is offered with or without essential parking brakes. The “SW” Power Wheel has extra-large tapered roller bearings, a ductile iron hub and heat treated ring gear to reduce backlash growth due to wear. The exterior bearing nut provides the best in shaft retention and shaft power. Output can be a spindle shaft or various sizes of integral pinion gears.