How you can connect O-ring Chains Remarks to connect general O-ring Chains

one.A connecting website link of an O-ring Chain for general application is pre-coated with grease in the pins. Prior to connection, confirm the grease to the surfaces of pins, and if your amount of grease is smaller, apply grease with bare hands. (If gloves are applied, the grease will be absorbed through the gloves.)
Instance: Once the connecting hyperlink (I) of an O-ring chain for common application is
shipped, O-rings are fitted with the roots of the pins. When the O-rings come loose as a consequence of vibration throughout transport, refit the O-rings in to your roots from the pins.
In this instance, be sure to return the grease collected on the roots of your pins on the central surfaces of the pins, additional at portion A than at portions B shown during the above illustration. (Portions A is worn due to sliding with the bushings.)
2.The chain is often most conveniently connected on the teeth of a sprocket. Engage the back links at the two ends from the chain using the sprocket teeth and match connecting pins. If the sprocket could be moved, the chain may also be connected over the loosened side.
three. Connecting method
one.Verify that O-rings are connected on the roots of your pins.
2.If your level of grease applied over the connecting pins is compact, coat the pins with grease with the central portions.
3.Insert the connecting pins to the bushings in the inner hyperlinks at the two ends.
four.Confirm the grease is utilized to the whole encounter of your O-ring, and match the O-ring onto the connecting pins.
five.Insert the connecting pins into the connecting plate and although pressing the connecting plate, set up the spring clip. Confirm no matter whether the head (the end with no split) of your spring clip is turned within the feeding course of your chain. (See the next illustration.)
6.Be sure to verify that the spring clip is securely fitted inside the clip grooves on the connecting pins.
This completes jointing in the connecting website link. Note that grease on the surfaces of connecting pins and O-rings can be removed in the course of set up work. In this instance, re-grease utilizing the grease about the surface from the base chain or the grease from the polyethylene bag through which the connecting website link was contained.