The EP Series Helical Bevel Reducer provides unmatched performance, durability, and design flexibility. This unit provides torque capacities up to 20,000 Nm (14,750 ft lbs).
The cat4CAD software allows simple interactive product collection of the entire gearbox and gear-electric motor system. Cat4CAD facilitates you in choosing and configuring these products, provides you the chance to print out comprehensive technical data bedsheets, and generates complete 2D drawings and 3D models for direct download.
11 sizes
Input power capacities from 0.16 to 120 HP
Gear ratios from 5:1 to 8900:1
Torque capacities to 20,000 Nm
Inverter duty course F insulated motor windings
Course 12 Helical and Spiral Bevel Gears: Provides higher efficiencies and higher torques in smaller sized sizes.
Multiple Input Options: Integral gear motors, inch or metric shafts, NEMA, IEC, and servo adapters provide unmatched drive versatility.
Multiple Output Choices: Hollow bores and shrink disks for shaft installation, inch and metric result shafts, installation pilots and flanges offer a wide variety of design solutions.
UNIBLOCK Housing: For maximum rigidity, universal mounting on five sides or with a torque arm.
Worldwide Electric motor: Multiple leads and windings for worldwide multi volt/Hz requirements plus modular design to simply accept brakes, encoders or forced cooling.
High efficiency engine design available
Innovative self-locking, self-aligning taper shaft engine connection
Gearbox supplied factory filled up with synthetic oil
Corrosion and shock resistant cast iron housing
High efficiency helical-bevel gears. 98% per stage
Normally closed breather with multiple locations (Optional OtN2000)
Double lip seals on heat treated, plunge surface shafts
Shaft mounting choices include tapered bushings designs
This is a comprehensive offering of energy-efficient, right angle helical bevel enclosed gearing. It really is obtainable as gearmotors and a variety of reducers with torque capacities up to 119,000 inch pounds. Housing styles include footed, encounter and flanged configurations. Gearmotors can be found in three stage high efficiency designs through 50 HP and single phase to 5 HP. We offer a selection of input and output shaft options. Additionally, you will see fixed and variable velocity motors and selection of ratios available in this product offering.
Features
Accommodates insight power from ΒΌ Hp to 75Hp
Torque rankings up to 119,489 in-lbs
Decrease ratios up to 7,500:1
Helical – bevel – helical gear train offers affordable high and low speed solutions
Up to 94% efficient
Four input options available for all units
Two output flange choices – B5 and B14
Multiple output shaft interfaces
Important dimensions interchangeable with major competitors
Modifications / Accessories
Integral Gearmotor
Clamp Collar C-Face Input
Solid Shaft Input
3-Piece Coupled C-Face Input
CEMA Screw Conveyor Adapter
EZ Kleen Washdown Package
XT Output Seals
Backstop
DURABLE Output Bearings
Inch or Metric Dimensions
Common Applications
Troughing Belt Conveyors
Slider Bed Conveyors
Mixer Drives
Screw Conveyors
Bucket Elevators
General Industrial Machinery
Common Industries
Aggregate and Cement
Air Handling
Chemical, Oil, and Gas
Food, Beverage, and Pharmaceutical
Paper and Forest
Unit and Baggage Handling
Water and Wastewater
As per the growing and varying demands of customers, we offer an array of Helical Bevel Equipment Reducers. The technological content material of our products allows for an extraordinary performance/lifespan ratio. The highly versatile Helical Bevel Gear Reducers we offer are successfully used in a multitude of industrial and civil applications. They are B-Series units that offer excellent value for money and result torque/weight ratio, especially considering that they need not a lot of servicing. Besides these, our products can be found in cast iron (sizes 063 to 163) or light weight aluminum (sizes A42 to A73) casing.
Features:
Sizes: 060-080-100-125-140-150-160
Available versions: B-fitted for electric motor coupling, IB with input shaft, CB with small motor, PB-fitted for engine coupling with flexible joint
Casing with ft FC, flange SC and common UC
Power up to 90 kW
Gears hardened and tempered with shaved or surface profile
Gearing with 3 reduction stages
Gleason spiral bevel equipment pairs with run-in profile, mounted as second decrease stage for an increased resistance
Reduction ratios between 5, 71 and 187, 24
Torque max 13.000 Nm and admissible radial loads max 80.000 N
High-power casings optimized with FEM analysis and input and result flanges of grey cast-iron G200 to ensure top level performances and high reliability
Load capacity calculated and verified according to ISO 6336 and AGMA 2001
Painted with RAL 5010 blue epoxy-polyester powder
Accessories: torque arm, result flange, result shaft, shrink disk, backstop device, protection cover kit, viton essential oil seals, reinforced result, assemble/disassemble kit
Series EP right angle helical bevel gear motors provide ratios from 8:1 to 160:1 in three levels or up to 10000:1 in five phases. Motors are available up to 90kW and output torque capability up to 12,300 Nm.
The series EP helical bevel gear motor is designed with integral cast feet for base or end mounting and may be offered with single or dual extended output shafts.
Devices are also available since shaft mounted or with result flanges and are designed for mounting horizontally or vertically. The systems can also be provided with a bolt on torque response bracket and all variants are available either motorised or with an input shaft assembly.
Adding to the brand new range of Ever-Power helical gear motors this product takes benefit of our a long time of accumulated design knowledge together with the utilization of high quality materials and parts. The outcome is a number of velocity reducing geared motors providing high load having capacities, increased efficiency, silent running and reliability.
Top features of Helical Bevel Gear Motor
Standard motor connection
Capability to fit double oil seals, on insight and output shaft as required.
All units are dimensionally interchangeable with other major manufacturers.
Units are manufactured and assembled from a family group of modular kits for distributor friendliness minimizing inventory and maximizing availability.
Motorized units could be installed with a backstop module and reducer Devices can be installed with a backstop and fan.
Applications:
-Conveyors, Agitators, Elevators, Cranes, Crushers
-Helical Bevel gear motors are found in industries such as chemicals, pharma, packaging, food processing, plastic and automation etc.
Key Features:
Sizes: A40-A50-A70
Available versions: EP – fitted for motor coupling, IEP – with input shaft, CEP – with small motor
Cases with foot, flange or universal
Switch on to 4,8 Kw
Gears with shaved or floor profile
Gearing with 2 and 3 reduction stages
Hypoid bevel gears for size A40 and A50, gleason bevel gear pairs for size A70, all with run-in profile
Reduction ratios between 7,62 and 442,76
Torque max 450 Nm and admissible radial loads max 5.500 N on hollow shaft and 10.000 N on solid shaft
Cases in die-cast aluminium alloy
Exceptional mechanical helical bevel gear reducer strength while being and particularly lightweight
Load capacity calculated to ISO6336 and verified according to AGMA 2001-B88
Painted with RAL 5010 blue epoxy-polyester powder in according to DIN 1843
Accessories: torque arm, output flange, output shaft.
Generallntroduction of HK series:
Gear Reducer
The EP series gear units, are novel transmission gadget and composed of Y series engine, helical gear,Arc gear and worm gear. The gears are made from high wear-resisting alloy components, specially and finely processed.
Advantages:
1: Helical-bevel equipment two-stage reducer
2: Compact framework, high efficiency
3: Quenched 20CrMnTi for gears
4: CE, ISO9001.
5: Compact design, small volume, wonderful appearance ,and solid capacity of being overloaded.
6: Precise division and wide range for transmission ratio.
7: The efficiency is up to since high since 96% with low energy usage, strong adaptability and is with the capacity of working continually in corrosive or damp environment.
8: All- purpose use, convenient and low-cost maintenance.
9: New seal device, strong adaptability.
10: Varied selection of motor combinations, mouting positions and struture projects.