Flexible Gear Rack

Flexible plastic equipment racks in 0.8 Mod (32DP) pitch. These racks can provide an easy to set up rotational drive as high as approx 270 degrees for example on camera focus rings. They also offer an economical alternative where a big gear is required or an extended stretch (up to 2 metres) of linear motion is desired. These racks are appropriate for our 0.8 Mod and 32 DP pitch Spur Gears.
EVER-POWER stock racks are created for high precision linear motion applications. You can expect a large selection of racks which range from module 0.5 to 10 and lengths from 100 to 2000 mm.
Hardened Surface Racks (MRGF – MRGFD) : Gets the highest strength and precision in the EVER-POWER regular rack series. Bolt holes can be remachined as carburizing is certainly applied only within the tooth area. J Series products are also available.
Hardened Floor Racks (KRGF-H – KRGFD-H) : High temperature treated ground gears with high precision and strength has excellent cost-performance ratio. J Series products are also available.
Hardened Racks (KRF-H/KRFD-H) : That is a solid rack made of Chromoly steel, treated by carburizing. Has high-power, high wear resistance, and enables downsizing of SR racks. J Series items are also available.
Hardened Racks (SRF-H/SRFD-H) : Stable Hardened racks with high strength, extended life span are affordable. J Series items are also available.
Thermal Refined Ground Racks (KRG – KRGF – KRGD) : High strength and abrasion-resistant for precision linear motion.
Steel Racks w/ Machined Ends (SRAF – SRAFD – SRAFK) : This gear rack gets the same tooth elevation and face width sizes, more compact and reasonably priced compared to SRF Racks
Steel Racks (SR) : Low priced, large selections of modules and amount of teeth. J Series items are also available.
Steel Racks w/ Machined Ends (SRF) : Low priced, large selections of modules and quantity of teeth. J Series items are also available.
Racks with Bolt Holes (SRFD – SRFK) : Low cost, large selections of modules and amount of teeth. J Series products are also available.
Stainless Steel Racks (SUR•SURF•SURFD) : Suitable for food machinery because of SUS304 materials\’s rust-resistant quality.
Plastic material Racks (DRF/DRFD/DRFK) : Plastic racks with little dimensional change, absorb lower water than MC Nylon racks. J Series products are also available.
Plastic-type Racks (PR•PRF) : Made form MC nylon, can be utilized without lubrication.
Brass Racks (BSR) : Small pitch racks made of free-cutting brass, excellent workability and high rust resistance.
Steel Circular Racks (SRO – SROS) : Convenient in applications where in fact the rack has the reciprocal motion. S Type is simple to install.
Stainless Steel Round Racks (SURO) : Same dimensions as SRO racks, except in stainless. Make use of where rust-resistance is necessary.
Surface Helical Racks (KRHG – KRHGF – KRHGFD) : Excellent products with high precision and strength, and low sound and abrasion characteristics.
Metal Helical Racks (SRH – SRHF – SRHFD) : Effective in reducing noise and vibration because of larger contact ratio of helical gears.
Molded Versatile Racks (DR) : Used in applications because of its flexibility, where metal racks do no have this attribute. Pinions and components are also available.
Molded Versatile Rack Clamps (SRS) : Utilized to secure Molded Flexible Racks.
Molded Flexible Rack Pinions (SSDR) : Spur pinions used for molded flexible racks.
Flexible Rack Guideline Rails (ARL) : Guide Rails for Molder Versatile Racks.
We offer as standard an array of Racks in Metric and Imperial sizes. Spur Racks are available in Steel (En8) or more to 2 metres in length. Stainless Steel and Delrin (Plastic material) Racks are produced with Spur and Helical tooth forms, square and circular sections up to 400mm in length. Alternative materials can be found on ask for. Moulded Hostaform Racks are available to offer an economical alternative where much less torque is required.
flexible gear rack Variable stiffness can improve the capability of human-robot interacting. Based on the system of a flexible rack and gear, a rotational joint actuator named vsaFGR is certainly proposed to regulate the joint stiffness. The versatile gear rack can be regarded as a combination of a nonlinear elastic element and a linear adjusting mechanism, providing benefits of compactness. The joint stiffness is definitely in the range of 217-3527 N.m/rad, and it is inversely proportional to the 4th-order of the apparatus displacement, and nearly independent from the joint angular deflection, providing advantages of quick stiffness regulation in a short displacement of 20 mm. The apparatus displacement with regards to the flexible equipment rack is perpendicular to the joint loading force, so the power required for stiffness regulating is really as low as 14.4 W, providing advantages of energy saving. The high compactness, great stiffness range and low power cost of vsaFGR are proved by simulations and experiments.
Flexible plastic gear racks in 0.8 Mod (32DP) pitch. These racks can offer an easy to install rotational drive of up to approx 270 degrees for instance on camera focus rings. They also provide an economical alternative where a big gear is necessary or an extended stretch (up to 2 metres) of linear movement is preferred. These racks are compatible with our 0.8 Mod and 32 DP pitch Spur Gears.
EVER-POWER stock racks are made for high precision linear movement applications. We offer a large selection of racks which range from module 0.5 to 10 and lengths from 100 to 2000 mm.
Hardened Floor Racks (MRGF – MRGFD) : Gets the highest strength and precision in the EVER-POWER regular rack series. Bolt holes can be remachined as carburizing is applied just within the tooth area. J Series products are also available.
Hardened Surface Racks (KRGF-H – KRGFD-H) : Warmth treated floor gears with high precision and power has excellent cost-functionality ratio. J Series products are also available.
Hardened Racks (KRF-H/KRFD-H) : That is a strong rack made of Chromoly steel, treated simply by carburizing. Has high-strength, high wear resistance, and allows downsizing of SR racks. J Series products are also available.
Hardened Racks (SRF-H/SRFD-H) : Steady Hardened racks with high strength, long life span are affordable. J Series products are also available.
Thermal Refined Ground Racks (KRG – KRGF – KRGD) : High strength and abrasion-resistant for precision linear motion.
Metal Racks w/ Machined Ends (SRAF – SRAFD – SRAFK) : This gear rack gets the same tooth elevation and encounter width sizes, more compact and reasonably priced compared to SRF Racks
Steel Racks (SR) : Low cost, large choices of modules and amount of teeth. J Series products are also available.
Metal Racks w/ Machined Ends (SRF) : Low cost, large choices of modules and number of tooth. J Series products are also available.
Racks with Bolt Holes (SRFD – SRFK) : Low cost, large selections of modules and amount of teeth. J Series products are also available.
Stainless Steel Racks (SUR•SURF•SURFD) : Suitable for food machinery because of SUS304 materials\’s rust-resistant quality.
Plastic-type material Racks (DRF/DRFD/DRFK) : Plastic racks with small dimensional change, absorb lower water than MC Nylon racks. J Series products are also available.
Plastic-type Racks (PR•PRF) : Produced form MC nylon, can be used without lubrication.
Brass Racks (BSR) : Little pitch racks manufactured from free-reducing brass, excellent workability and high rust resistance.
Steel Circular Racks (SRO – SROS) : Convenient in applications where in fact the rack gets the reciprocal motion. S Type is simple to install.
Stainless Steel Round Racks (SURO) : Same dimensions as SRO racks, except in stainless steel. Make use of where rust-resistance is necessary.
Ground Helical Racks (KRHG – KRHGF – KRHGFD) : Excellent items with high precision and power, and low noise and abrasion characteristics.
Steel Helical Racks (SRH – SRHF – SRHFD) : Effective in reducing noise and vibration because of larger get in touch with ratio of helical gears.
Molded Flexible Racks (DR) : Used in applications because of its flexibility, where metal racks do no have this attribute. Pinions and components are also available.
Molded Flexible Rack Clamps (SRS) : Utilized to secure Molded Flexible Racks.
Molded Versatile Rack Pinions (SSDR) : Spur pinions used for molded versatile racks.
Flexible Rack Instruction Rails (ARL) : Instruction Rails for Molder Flexible Racks.
You can expect as standard an array of Racks in Metric and Imperial sizes. Spur Racks can be found in Steel (En8) and up to 2 metres in length. Stainless Steel and Delrin (Plastic material) Racks are created with Spur and Helical tooth forms, square and round sections up to 400mm in length. Alternative materials are available on ask for. Moulded Hostaform Racks can be found to offer a cost-effective alternative where less torque is required.
Variable stiffness can improve the capacity for human-robot interacting. Based on the mechanism of a versatile rack and gear, a rotational joint actuator named vsaFGR is certainly proposed to modify the joint stiffness. The versatile gear rack can be regarded as a mixture of a nonlinear elastic element and a linear adjusting mechanism, providing advantages of compactness. The joint stiffness is certainly in the range of 217-3527 N.m/rad, in fact it is inversely proportional to the 4th-order of the apparatus displacement, and nearly independent from the joint angular deflection, providing advantages of quick stiffness regulation in a short displacement of 20 mm. The gear displacement with respect to the flexible equipment rack is usually perpendicular to the joint loading force, so the power necessary for stiffness regulating is as low as 14.4 W, providing benefits of energy saving. The high compactness, great stiffness range and low power cost of vsaFGR are proved by simulations and experiments.