Fan Motor, 1/8 hp 120V 
2.2 Amp 3-Speed
General Description: New fan motor, removed from unused 18” or 24” China Air flow Compressor diameter TPI fans. Designed to run an 18” or 24” enthusiast blade (blade NOT included).
This motor includes a (detached) cord with grounded plug, motor capacitor and a 3-speed control switch. All of the wiring in the middle of your electric electric motor, capacitor and quickness control change is still hooked up however the cord itself is normally detached as seen in the photos. (Discover “Control Notice” below for alter type.)
T (See “App Notice” below for utilize in various other applications.)
Dimensions: The engine body is 5” diameter and 3 ½” long (excluding the shaft). The engine shaft is½” (0.500″) diameter x 2 ½” long with a collection screw soft. There are (4) threaded mounting lugs on leading of the motor, ½” long x .16 dia. with washers and nuts. The studs appear to have got 4mm threads and also to become on a 117mm (4.6”)diameter circle (3 ¼” measured in one stud to another).
Rate: The approximate engine speeds (with a enthusiast blade attached):1660, 1550 and 1370 RPM. Direction of rotation (facing the shaft end of the electrical motor) is Clockwise.
Control Take note: Motors may come with The 3-swiftness rotating control KNOB OR a 3-speed PULL-CHAIN SWITCH (we have demonstrated BOTH versions in the images). These two types of switches both control the engine just as (but you possess a rotating knob and you have got a pull-chain). If you order several electric motor at the same time, we can do our better to supply your order with each one kind of control or the excess.
Application Note: USUALLY DO NOT use this electric electric motor in a nonfan software. This is a totally enclosed fan electric electric motor and designed to have constant ventilation over the electric motor electric fan motor china casing for cooling. The casing isn’t vented and the electric electric motor will overheat and get into automated thermal overload if operate in a nonfan system where there isn’t solid ventilation past the motor. (Caution Note: the electric motor will restart instantly when it cools back off.) Using this electric motor for applications apart from 18 & 24″ TPI fans may possibly also overload the engine and lead it to proceed into automated thermal overload. (Your lover blade from another manufacturer may possess a steeper blade position.)
Origin: This electric engine is produced in China.